VBA Word:根据文件名代码生成照片题注
数据小陈
把 InsertCaption 的 Label 从 Table 改成 Figure,并把 Title 改为 ": " & CaptionTextFromFile(fileName)。Word 就会生成 Figure 1: 这类自动编号,冒号后面的说明由文件名解析得到。不要手写死 Figure 1,否则插入多张图片或后续增删图片时编号容易出错。
原代码里写的是 Label:="Table",所以生成出来就是 Table 题注;Title 又直接用了 fileName。像 SP_01_BH03.jpg 这样的文件名,要先去掉扩展名,再按 _ 拆分;SP 对应 Stockpile,BH 对应 Borehole,数字保持原样。下面的函数同时兼容 BH03 和 BH_03 两种写法。
修改步骤:
- 保留原来的插入图片、缩放和换行逻辑。
- 在模块中加入
CaptionTextFromFile、AlphaPrefix、MapCode三个函数。 - 用下面的调用替换原来的
img.Range.InsertCaption ...。
' 替换原题注调用
img.Range.InsertCaption _
Label:="Figure", _
Title:=": " & CaptionTextFromFile(fileName), _
Position:=wdCaptionPositionBelow
' 放到同一个模块中
Private Function CaptionTextFromFile(ByVal fileName As String) As String
Dim baseName As String
Dim p As Long
Dim parts() As String
Dim i As Long
Dim token As String
Dim code As String
Dim num As String
Dim nextPart As String
Dim result As String
p = InStrRev(fileName, ".")
If p > 0 Then
baseName = Left$(fileName, p - 1)
Else
baseName = fileName
End If
parts = Split(baseName, "_")
For i = LBound(parts) To UBound(parts)
token = parts(i)
If Len(token) > 0 Then
code = AlphaPrefix(token)
num = Mid$(token, Len(code) + 1)
If Len(num) = 0 And i < UBound(parts) Then
nextPart = parts(i + 1)
If IsNumeric(nextPart) Then
num = nextPart
i = i + 1
End If
End If
If Len(code) > 0 Then
result = Trim$(result & " " & MapCode(code))
If Len(num) > 0 Then result = result & " " & num
Else
result = Trim$(result & " " & token)
End If
End If
Next i
CaptionTextFromFile = result
End Function
Private Function AlphaPrefix(ByVal s As String) As String
Dim i As Long
For i = 1 To Len(s)
If Not Mid$(s, i, 1) Like "[A-Za-z]" Then Exit For
Next i
AlphaPrefix = Left$(s, i - 1)
End Function
Private Function MapCode(ByVal code As String) As String
Select Case UCase$(code)
Case "SP": MapCode = "Stockpile"
Case "BH": MapCode = "Borehole"
Case Else: MapCode = code
End Select
End Function
注意事项:
fileName在Dir循环里只是文件名,不含路径;函数还会去掉扩展名,所以不会把.jpg带进题注。- 如果文件名里还有更多代码,在
MapCode里继续加Case即可;未识别的代码会原样保留。 Label:="Figure"要求当前 Word 的题注标签里有Figure。如果界面是本地化版本且标签名不同,把Label改成实际存在的标签名,或者先通过“引用→插入题注”新建Figure标签。- 若图片插入后题注位置不理想,先检查
Position:=wdCaptionPositionBelow和图片所在段落,不要靠硬编码编号来修。
备注:内容仅供参考。
